Thermostats
Single pole rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad thermostat with a new one
Capillary Length: 60"
Bulb Thickness: 5/16"
| Thermostat Type |
Mechanical |
| Thermostat Application |
Generic |
| Bulb Diameter |
5/16" |
| Bulb Length |
4-1/2" |
| Capillary Length |
60" |
| Thermostat Amperage |
25A |
| Electrical Connection |
Slide Connector, 1/4" Male |
| Pole/Throw |
Single Pole Single Throw (spst) |
