Thermostats
Single pole rated at 25 amps with max temp rating at 107°F. Best results are obtained when the bulb is installed in a dry well or groove tube at or immediately before the heater. This is a safety device! If it is found to be out of calibration, do not attempt to perform a field adjustment! Replace bad thermostat with a new one
| Thermostat Type |
Mechanical |
| Thermostat Application |
Generic |
| Bulb Diameter |
1/4" |
| Bulb Length |
3-3/4" |
| Capillary Length |
36" |
| Thermostat Amperage |
25A |
| Electrical Connetion |
Slide Connector, 1/4" Male |
| Pole/Throw |
Single Pole Single Throw (spst) |
