Pump, BWG Sta-Rite Dura-Jet, 1.0hp, 115v, 2-Spd, 2", OEM

• Motor Voltage	115v
  Speed	2 Speed (2-Spd)
  Motor Amperage/Wattage	10.4A/3.6A
  Horsepower	1.0hp
  Manufacturer	Sta-Rite/Pentair/Balboa
  Pump Model	Dura-Jet DJ
  Suction Pipe Size	2"
  Suction Connection Type	Male Buttress Thread (mbt)
  Suction Style	Center
  Discharge Pipe Size	2"
  Discharge Connection Type	Male Buttress Thread (mbt)
  Discharge Style	Side
  Motor Frame	48-Frame
  Drain Plug Location	6,9 o`clock

  del: Balboa DJAYEA

• The model K48L2a1 appears to be related to a spa pump motor. Here are some details I found:

  • The Sta-Rite Dura-Jet Spa Pump is a replacement spa pump for the Sta-Rite® or Dura-Jet brand. This is a dual speed pump with ratings: 1.0HP, 115V, 48-Frame, 60Hz, 2.0 inch intake and discharge.
  •  It replaces most DJAYA pumps with similar amp draw and voltage rating. This pump is normally used in Dimension One Spas, Hawkeye Spas, Master Spas, and Great Lakes Spas.

• Horsepower: 1.0 HP continuous
• Break horsepower: 1.5 HP
• Voltage: 115V
• Speed: 2-speed
• Flow rate: 105 GPM (high speed) / 52.5 GPM (low speed)
• Discharge size: 2"
• Suction size: 2"
• Drain plug location: 12 o'clock
• Pump to motor foot types: 48
• Suction style: Center suction
• Discharge style: Side discharge
• Warranty: 2 years

This pump is a good choice for small to medium-sized spas with up to 16 jets. It is a two-speed pump, so you can adjust the flow rate and pressure to your needs. It is also energy efficient, with a low operating cost.

Here are some additional details about the pump:

• The motor is a 48 frame induction motor with a capacitor start.
• The pump is made of cast iron and stainless steel, which makes it durable and corrosion resistant.
• The pump comes with a set of unions, but you will need to purchase hoses separately.

Here are some of the key features of the 4239110-S spa pump:

• 2-speed operation for efficient water circulation
• Cast iron and stainless steel construction for durability
• Capacitor start motor for quiet operation
• Two sets of 2" unions included
• UL, CUL, and ETL certified

If you are looking for a reliable and efficient spa pump, the 4239110-S is a good option to consider.

Here are some of the benefits of using a two-speed spa pump:

• You can save energy by running the pump at a lower speed when you don't need as much water circulation.
• You can get more precise control over the water flow and pressure.
• The pump is quieter at lower speeds.

If you are replacing an old spa pump, be sure to check the compatibility with your spa's plumbing and electrical system. You should also make sure that the pump has the right horsepower and flow rate for your spa.