The Laing LMB07102983 E14 is a high-end spa circulation pump designed for use in pools and spas. It operates on 230 volts of power and a buttress thread of 1-1/2 inches in diameter. The pump is compact and lightweight, less than 5 lbs. The E14 consumes 40% less power than standard circulation pumps with 48-frame induction motors. It is whisper-quiet and highly efficient requiring only 115 Watts of power.
The Laing E-14 is specifically designed for water circulation and is sealed with a captured O-ring design for the best possible seal. Built-in DRY RUN protection is programmed into the software to help eliminate motor and pump damage if the pump is run without water when not sufficiently primed, or is air-locked.
The E14 has the largest run-out flow of the E series models at 36 Gallons per minute. It saves up to 68% electricity compared to a standard circulating pump. The pump is designed for continuous operation.
The pump has a discharge position at the side, a suction size of 1-1/2" Union, and a discharge size of 1-1/2" Union. Please note that the unions are not included.
The number LMB07102983 refers to the Laing E-14 230-volt circulation pump, which is widely used as a highly efficient, quiet 24-hour circulation pump across many different spa brands.
This specific pump (also known by alternate part numbers 10-0107, 73348, and X400825) is a popular choice for many manufacturers due to its compact size, energy efficiency (it uses only about 115 watts of power), and magnetic drive design that eliminates a traditional mechanical seal prone to leaks.
Here is an extensive list of spa manufacturers who have been known to use the Laing E-14 circulation pump (LMB07102983) in their hot tubs:
Arctic Spas (used as a replacement for discontinued models like the Little Giant pump)
Artesian Spas
Cal Spas
Clearwater Spas
Endless Pools
Healthy Living Spas
Hydro Pool hot tubs
LA Spas
Marquis Spas
Master Spas (commonly used in models from 2009 onwards, often listed as part MASX400825)
Royal Spas
Saratoga Spas
And many other generic brands that use industry-standard components
