A complete hot tub control pack. TOPSIDE IS INCLUDED
The ePack controls a 2-speed primary pump, a single-speed air blower or a single-speed secondary pump, a 12-volt spa light, an auxiliary light, and an ozonator. This system is convertible and may be run on 120 volts.
Factory Shipping, Warranty, and Technical Support
Before finalizing your order for the ACC ePack with a digital topside, please review the following features and specifications to ensure it meets your needs:
TheACC ePackis a comprehensive control system for your spa, designed with user-friendly features and built to last.
This unit is convertible to replace a Low Flo unit.
The package includes adigital topsidemeasuring 2.5" x 5.5", which requires an access hole of 4 3/4" X 1 3/4" for installation. Options are available like the KP2105 (2” x 4.5”).
An optional deluxe topside measuring 3.5" x 7.5" requiring a hole size of 6" x 2.25" is also available.
The system can controlone pump circuitwith two speeds (110/220V, 12A Max), and asecond pump circuitwith one speed (110/220V, 12A Max).
It also includes acirculation pump circuit(110/220V, 4A Max) that operates 24 hours when activated and requires 25 GPM, anozone circuit(110/220V, 1A Max), and a12V 12W light circuit.
The package comes with a4.0KW, 240V Flo-Thru heaterhoused in stainless steel, along with a calibrated pressure switch and a heavy-duty 2-pole contactor to control the attached heating element.
The system includes a 48-inch amp motor, blower, and ozone cords.
It offersfreeze protection, high-limit protection, filtration mode, and an economy mode for energy efficiency.
The package includes a pair of2-inch heater tailpieceswith O-ring gaskets.
The product comes with a2-year limited factory warrantyfor your peace of mind.
This controller is flexible enough to replace different heater placements and heater lengths controlling multiple pumps. It’s an excellent replacement for virtually any spa control at an industry-best price.
Please note that this system is convertible and may be run on either 120 volts or 230 volts. However, if converting from 230V to 120V, pumps must be either 120V or convertible from 230V to 120V to work.
Before ordering, please verify the pack size requirements for installation as it is your responsibility to check this information. If you’re unsure about any of these features or need further assistance, please don’t hesitate to call us. We’re here to help ensure you choose the right product for your needs.
Super excited , this is second one I purchased to replace Marquis spa from 2006 year ( roughly) . Perfect fit . Nothing to cut or modify. Works like a chemp. Little tight but fits . Will buy again ..
Purchased for the spa salon, and second one for my self.
Compare to original Marquis parts i saved over a $1K easy. Main board housing is a lot better sealed than original Marquis. Hopefully will get a long time out of it. Custom service is superb. On both ends , seller and E-Pack .