This is a diffuser only from the back end of the Waterway Power Storm Jet. This is the white plastic back that sometimes fails on the Waterway Power Storm Jet.
This will fit the regular Power Storm Internals, it will not fit the Power Storm II internals which
On July 19, 2011, Waterway made a product change to all Roto and Twin Roto Storm jet eyeballs to fix the eyeballs in the desired “spin” orientation. The older eyeballs were made adjustable, where the spa users would have to position the eyeballs in the correct position to make them spin. The aesthetics of the jets remain near the same.
This jet diffuser does not come with the small insert that snaps in the end - for that you need the 218-6620.
THESE WILL JUST SNAP TOGETHER LIKE THE ORIGINALS AND THE JET INTERNAL WILL FIT GIVING YOU LIKE NEW PERFORMANCE FOR HALF THE PRICE.
Diameter = 2-1/2"
Length = 4-1/8"
To install without damage you must -
Place the jet
With the internals installed in the diffuser - Square the diffuser on the
Once squared and aligned with the snap on positions.
Slowly push STRAIGHT DOWN ( not at