Smart Touch 1000 Digital Control Pack w/Digital Topside.
This unit is convertible to replace a Low Flo unit.
- One pump circuit, two speeds, 110/220V, 12A Max
- Blower or Pump 2 circuit, 1-speed, 110/220V, 12A Max
- Circ Pump circuit, 110/220V, 4A Max (24Hr when activated, Requires 25 GPM)
- Ozone circuit, 110/220V, 1A Max
- 12V 12W Light circuit
- 1.4/5.5KW, 120/240V Flo-Thru heater
- Adjustable mount Stainless steel heater housing
- 48-inch amp motor, blower, and ozone cords
- Topside Panel Included
- UL and ETL Listed
- Freeze protection
- High-limit protection
- Filtration mode
- Economy Mode
- Pair of 2 inch Heater Tailpieces with O-Ring Gaskets
- 1-Year Limited Factory Warranty
Includes Heater , Wiring Harness, and Topside Digital Control.The system comes with a calibrated pressure switch, a heavy duty 2 pole contactor to control the 5.5 KW attached heating element. This system is convertible and may be run on 120 volts. SmarTouch Digital family of electronic spa controls are built with the benefit of 20 years of experience. These controls have a lot of smarts built in and they are by far more reliable and above all, they are extremely friendly to use. They have been designed by the user, the spa manufacturer as well as the serviceman in mind. Each aspect of a SmarTouch Digital is field programmable. With 3 different systems in the family, there is a SmarTouch Digital for every spa application. -Universal Heater barrel easily slides from bottom to top of the controller for any install situation. (Don't need adjustable heater barrel? See ACC 1000 Pack) -Retrofit Kit Includes Everything to Replace your Existing System with this Updated Digital System -Super Efficient 15, 5.5 KW Heater. -FULLY ENCLOSED Aluminum Rust-Free Control Box -Control Voltage options 120V OR 240V -FULLY PROGRAMMABLE Filter Cycles, Economy Mode, Silent Time, Temp. Sensor Calibration -Operates 2 PUMPS + OZONE + LIGHTS -CONTROL BOX WITH SENSORS AND PRESSURE SWITCH PRE-INSTALLED -2.25x 5 DIGITAL TOPSIDE -CORDS FOR PUMP #1, PUMP #2 OR AIR BLOWER, OZONE, LIGHT -HEATER BARREL UNIONS AND GASKETS -OWNERS MANUAL.
These controls are built to last. They will replace brand name spa equipment in small or large hot tubs with all the reliability you would expect. The controls are flexible enough to replace different heater placement and heater lengths controlling multiple pumps. They would be an excellent replacement for virtually any spa control and at the best price in the industry
Top side digital 2.5" x 5.5" requiring 4 3/4" X 1 3/4" access hole.
DELUXE TOPSIDE - Topside digital 3.5" x 7.5" requiring 6" x 2.25" hole size
You MUST answer the ALL OPTION questions for us to send you the unit configured the way you want it.
It will NOT control Fiberoptics, Stereos, TV, ETC.
If converting from 230V to 120V. PUMPs must be 120V or 230v/120v to work.
Because these are Generic replacement spa packs and will replace 90% with little change 10% will require more.
When you're going to different equipment from different manufacturer, there may be some adaptation.
Some changes in the connections and things you have to do to fit this equipment.
Verify Pack size requirements for install.
It is your responsibility to Check this information.