Vico Wetends
-
Vico Ultimax 2"x 2" mbt, 48 or 56 frame: This Wet End is a 2" x 2" 48 or 56 frame Ultimax Vico® that would normally be found on a 230V pump with 9.0 Amps High speed or 14.0 Amps at 115v. This side discharge, 2" x 2" mbt which would measure about 3" edge to edge on the threads, 48 or 56 frame wet end is used with a thru-bolt style motor.
-
BWG Vico Ultima 2.0hp 1-1/2"mbt 48fr: This center discharge, 1-1/2"mbt, 48 frame wet end is used with a 2.0hp thru-bolt style motor.
-
Vico Ultimax spa pump wet end for 2 & 4 HP Vico by Balboa spa pumps: This wet end comes complete with seal and impeller and has 2 inch threaded union connections to fit your 2 inch plumbing. This wet end with impeller fits 48 or 56 frame Vico Ultimax pumps.
Frames" refers to the size of your hot tub Motor. All main spa motors have either 48 or 56 frames. 48 frame motors are 5.5" in diameter. 56 frame pump motors are typically 6.5" in diameter. You can also determine the frame size from the bolt spacing- the 48 frame is 3-5/8" and the 56 frame is 4-1/4."
To determine the size of the plumbing, measure from outside thread to outside thread.
Drain Plug, Balboa Vico Ultima/Ultimax, with out O-Ring
Product ID: 1214138
Pump Union, 2" Female Buttress Thread x 2" Slip, Quantity 2
Product ID: 52202000
Wet End, BWG Vico Ultima, 1.0hp, 1-1/2"Ctr x 1-1/2"Side,...
Product ID: 1215116
Wet End, BWG Vico Ultima, 1.5hp, 1-1/2"Ctr x 1-1/2"Ctr, 48fr
Product ID: 1215128
Wet End, BWG Vico Ultima, 4.0hp, 2" Center x 2" Side, 48fr
Product ID: 1215161
Wet End, BWG Vico Ultimax, 2.0hp, 2"Center x 2"Side, 48/56fr
Product ID: 1215185
Wet End, BWG Vico Ultimax, 4.0hp, 2"Center x 2"Side, 48/56fr
Product ID: 1215007