Stainless steel replacement heater assembly. 2" x 15" with 2" x 1-1/2" tailpieces. There are no mounting studs on this assembly, and the pressure switch hole is on the same side as the thermowell grooves. Rated at 4.0kW/240v
Heater Application
Coleman Spas
Heater Length
15"
Heater Type
Flo Thru
Housing Configuration
Straight
Housing Diameter
2"
Kilowatts
1.0kW/4.0kW
Pressure Tap Orientation
90 Deg from Terminals
Voltage
115v/230v
Heater Inlet Size
2"
Heater Inlet Type
Slip (s)
Heater Outlet Size
2"
Heater Outlet Type
Slip (s)
Wattage: 4,000 watts
Voltage: 240 volts
Current: 16.67 amps
BTU output: 14,400 BTUs
Element size: 2" x 15"
Element material: Stainless steel
Pressure switch: 20 psi
Mounting: Through-wall
Other features: Flothru design, 90 degree pressure switch tap
This heater is designed for use in hot tubs and spas. It has a 4,000-watt element that can heat up to 14,400 BTUs of water, making it suitable for hot tubs up to 400 gallons in size. The heater is made of stainless steel, which makes it corrosion-resistant and long-lasting. It also has a flothru design, which means that the water flows through the element more evenly, resulting in more efficient heating.
Here are some additional details about the heater's features:
The 90 degree pressure switch tap allows the pressure switch to be installed in a variety of locations.
The through-wall mounting makes it easy to install the heater in a hot tub or spa.
The flothru design helps to prevent calcium buildup and other deposits, which can extend the life of the heater.