Bath Heaters

Bath Heaters

Bath tub heaters are a valuable tool for maintaining the temperature of hot water once it’s already in the tub.
They are not designed to heat cold water.

When it comes to installation and use, there are some important guidelines to follow:

  1. Electrical Requirements: The heater requires a dedicated circuit with a 20-amp breaker. This ensures that the heater has the necessary power to operate effectively and safely.

  2. Switch Control: An on and off switch is necessary for controlling the operation of the heater. This allows you to easily turn the heater on when you need it and off when you don’t.

  3. Safety Precautions: It’s crucial to never run the heater dry. Doing so can cause damage to the heater. Always ensure there’s hot water in the tub before turning on the heater.

  4. Grounding: The heater must be grounded. This is a critical safety measure that helps prevent electrical shocks.

By following these guidelines, you can safely and effectively use your bath tub heater to maintain a comfortable water temperature.

10% OFF
CT101-A Bath Htr In-Line 120V 1kW 3` Cord/Plug
 
Price:
$197.99
$219.99
10% OFF
CT101-B Bath Htr In-Line 120V 1.5kW 3` Cord/Plug
 
Price:
$206.99
$229.99
10% OFF
Heater, Bath, H-Q InLine, PH201-20UP, 230v, 2.0kW, 3ft Bare Cord
 
Price:
$206.99
$229.99
10% OFF
Heater, Bath, H-Q T Style, PH100-A, 115v, 1.0kW, 3ft Cord, Plug
 
Price:
$206.99
$229.99
10% OFF
Heater, Bath, HQ InLine, PH101-15UP-S, 1.5kW, 3ft Cord, Plug, 5.5"
 
Price:
$206.99
$229.99
10% OFF
Heater, Bath, H-Q InLine, PH203-20UV, Vac, 230v, 2.0kW, 1-1/2s, Nema
 
Price:
$215.99
$239.99
10% OFF
PH100-15UP Bath Htr T-Style 120V 1.5kW 3` Cord/Plug
 
Price:
$215.99
$239.99
10% OFF
PH101-15UV Bath Htr In-Line, Vacuum, 120V 1.5kW 3` Plug
 
Price:
$215.99
$239.99
10% OFF
Coates 1.5ILS 120V In-Line Complete
 
Price:
$495.99
$550.99

BATH TUB HEATERS ARE A AID IN MAINTAINING WATER TEMPERATURE AFTER HOT WATER IS IN THE TUB. NOT AS A HEATER FOR COLD WATER IN THE TUB.

 

You MUST;

  1. Have a 20 amp breaker
  2. Dedicated circuit
  3. On and Off switch
  4. MUST NOT run heater dry. WILL damage the heater
  5. GROUNDED.